印尼二手电子进口新规10月9日生效:136个HS税号受限,出口企业如何应对?
📌 核心提示
2026年10月5日,印尼贸易部对外贸易总司(Ditjen DAGLU)发布Permendag 23/2026官方宣传稿:10月2日在巴淡(Batam)自由贸易区与免税港(KPBPB)举办新规宣讲,核心是收紧“非新状态电子商品”(BETB)的进口管理。
这项新规将于2026年10月9日正式生效。对中国做二手设备、翻新电子、旧货出口印尼的企业来说,这是一条需要立刻纳入评估的政策变化。
一句话总结:印尼不是完全禁止二手电子进口,而是把它们纳入 “指定区域、指定用途、指定资质” 的窄通道。出口二手设备、翻新电子的企业,需要按新规重做合规评估。
一、新规管什么:136个HS税号位的二手电子
Permendag 23/2026修订的是Permendag 24/2025《非新品进口政策与监管及非B3废弃物》,本次聚焦电子类非新品(BETB) 。
| 关键要素 | 具体内容 |
|---|
| 涉及范围 | 136个HS税号位(Pos Tarif HS) |
| 适用场景 | 作为巴淡KPBPB特殊加工工业(Industri Pengolahan Khusus)的原材料用途进口 |
| 政策定位 | 印尼官方明确,这批二手电子是给巴淡园区内加工产业用的生产原料,不是面向全国市场的普通商品 |
核心逻辑:印尼不是全面开放二手电子进口,而是为巴淡特定加工产业开辟一条受控的、可追溯的原料通道。

二、四大硬性要求
要求一:进口商资质
须持有有效的 NIB(商业识别号),且作为 API-P(生产用途进口许可证)使用。这意味着纯贸易商(API-U)无法走这条通道。
要求二:前置审批
必须满足:
进口许可(PI,Persetujuan Impor)
Surveyor报告(LS,Laporan Surveyor)
通过在原产国进行的技术核查(Verifikasi Teknis di Negara Asal)
要求三:限制流转
BETB 不得从巴淡KPBPB转出到印尼其他关境区域。这是一条硬红线——进口的二手电子只能在巴淡园区内加工使用,不能流入印尼国内市场。
要求四:过程监管
按月在 SINSW系统中报告实际进口情况,由巴淡BP特勤组联合海关总署(Ditjen Bea Cukai)和PKTN总司实施严格监管。

三、红线与环保要求
防止电子垃圾(e-waste)进入
进口的BETB必须呈均质(homogen)、物理特征清晰的形态,避免以“二手”名义夹带电子废物。这意味着混装、杂乱的旧电子产品将无法通过核验。
环保合规
二手电子的处理、残渣和产生的废弃物必须符合印尼环境法规要求。
政策边界
Dirjen对外贸易总司强调,该政策是为支持巴淡工业园需求、不干扰国内市场。

四、背景:为什么是现在
印尼对二手商品进口的监管一直在加码:
| 时间 | 政策/事件 |
|---|
| 2025年 | Permendag 24/2025明确禁止进口二手摩托车 |
| 2026年6月 | Permendag 18/2026完善进口许可服务与法律确定性 |
| 2026年8月 | 印尼执法部门查获一起从中国走私的二手哈雷摩托车案(CKD拆散状态报关,被认定为伪报) |
| 2026年10月 | Permendag 23/2026进一步细化二手电子的准入路径 |
方向一致:二手商品的进口空间被压缩、通道被规范化。
五、出口企业应对建议
建议一:核对HS税号位
出口前确认产品是否落在本次136个HS税号位内。非新品、旧货、翻新电子一律按BETB路径评估,不要试图以“新货”名义申报。
建议二:确认进口商资质
印尼进口商必须持有有效的NIB和API-P资质。没有资质的采购方,货到港后无法完成清关。
建议三:准备原产国核查
PI和LS要求在原产国进行技术核查,意味着二手设备出口需要在发运前完成检验与报告,物流周期要预留额外时间。建议预留至少30-45天的核查周期。
建议四:明确最终用途
只有进入巴淡KPBPB特殊加工工业、且不会转出园区关境的二手电子才符合合规路径;其他流向要重新评估可行性。
建议五:确保货物形态合规
进口的BETB必须呈均质、物理特征清晰的形态。混装、杂乱的旧电子产品将无法通过核验。出口前需完成分拣、分类和标准化包装。
六、结语
Permendag 23/2026的生效,标志着印尼二手电子进口从 “模糊地带” 走向 “窄通道规范化” 。对于出口二手设备、翻新电子的中国企业而言,合规路径已经明确,但门槛也显著提高。
核心判断:如果你的产品属于136个HS税号位范围内,且最终用户是巴淡KPBPK内的加工企业,这条通道仍然可用;如果最终流向是印尼国内市场,则需要重新评估可行性。
Indonesia's New Used Electronics Import Rules Take Effect 9 October: 136 HS Codes Restricted – How Should Exporters Respond?
📌 Key Notice
On 5 October 2026, the Directorate General of Foreign Trade (Ditjen DAGLU) of Indonesia's Ministry of Trade issued an official communication on Permendag 23/2026: a socialisation event was held on 2 October at the Batam Free Trade Zone and Free Port (KPBPB), focusing on tightening import management of "non-new electronic goods" (BETB) .
The new regulation takes effect on 9 October 2026. For Chinese companies exporting used equipment, refurbished electronics, and second-hand goods to Indonesia, this is a policy change that requires immediate assessment.
In one sentence: Indonesia is not completely banning used electronics imports, but placing them into a narrow channel of "designated zone, designated use, designated qualification." Exporters of used equipment and refurbished electronics need to redo their compliance assessment under the new rules.
I. What the New Regulation Covers: Used Electronics under 136 HS Codes
Permendag 23/2026 amends Permendag 24/2025 on "Non-New Import Policy and Supervision and Non-B3 Waste," focusing on electronic non-new goods (BETB) .
| Key Element | Details |
|---|
| Scope | 136 HS tariff headings (Pos Tarif HS) |
| Applicable Scenario | Import for use as raw materials by Special Processing Industry (Industri Pengolahan Khusus) in Batam KPBPB |
| Policy Positioning | Indonesian authorities explicitly state these used electronics are production raw materials for processing industries within the Batam park, not ordinary goods for the national market |
Core Logic: Indonesia is not fully opening used electronics imports, but creating a controlled, traceable raw material channel for specific processing industries in Batam.

II. Four Hard Requirements
Requirement 1: Importer Qualification
Must hold a valid NIB (Business Identification Number) and use it as an API-P (Import Licence for Production Use). This means pure trading companies (API-U) cannot use this channel.
Requirement 2: Prior Approvals
Must satisfy:
Import Approval (PI, Persetujuan Impor)
Surveyor Report (LS, Laporan Surveyor)
Technical verification conducted in the country of origin (Verifikasi Teknis di Negara Asal)
Requirement 3: Transfer Restriction
BETB must not be transferred from Batam KPBPB to other customs territories in Indonesia. This is a hard red line – imported used electronics can only be processed and used within the Batam park and cannot flow into the Indonesian domestic market.
Requirement 4: Process Supervision
Monthly reporting of actual imports through the SINSW system, with strict supervision by the Batam BP Special Task Force in conjunction with the Directorate General of Customs and Excise (Ditjen Bea Cukai) and the Directorate General of PKTN.

III. Red Lines and Environmental Requirements
Preventing e-waste entry
Imported BETB must be in homogeneous form with clear physical characteristics, preventing electronic waste from being smuggled in under the guise of "used goods." This means mixed, chaotic old electronics will not pass verification.
Environmental compliance
The processing, residues, and waste generated from used electronics must comply with Indonesian environmental regulations.
Policy boundary
The Directorate General of Foreign Trade emphasised that the policy is designed to support the needs of Batam's industrial park without disrupting the domestic market.

IV. Background: Why Now?
Indonesia has been continuously tightening supervision of used goods imports:
| Time | Policy/Event |
|---|
| 2025 | Permendag 24/2025 explicitly banned imports of used motorcycles |
| June 2026 | Permendag 18/2026 improved import licensing services and legal certainty |
| August 2026 | Indonesian authorities foiled a smuggling case of used Harley-Davidsons from China (declared in CKD disassembled state, determined as false declaration) |
| October 2026 | Permendag 23/2026 further refined the access pathway for used electronics |
The direction is consistent: import space for used goods is being compressed, and channels are being regularised.
V. Recommendations for Exporters
Recommendation 1: Check HS Codes
Before exporting, confirm whether your product falls within the 136 HS tariff headings. Non-new goods, second-hand goods, and refurbished electronics should all be assessed under the BETB pathway – do not attempt to declare them as "new goods."
Recommendation 2: Verify Importer Qualification
Indonesian importers must hold valid NIB and API-P qualifications. Buyers without these qualifications cannot complete customs clearance after goods arrive at port.
Recommendation 3: Prepare Origin Verification
PI and LS require technical verification in the country of origin, meaning used equipment exports need inspection and reporting completed before shipment, with additional time reserved in the logistics cycle. It is recommended to reserve at least 30-45 days for the verification cycle.
Recommendation 4: Clarify End Use
Only used electronics entering Batam KPBPB's Special Processing Industry and not transferred out of the park's customs territory qualify for the compliant pathway; other flows need to be reassessed for feasibility.
Recommendation 5: Ensure Compliant Cargo Form
Imported BETB must be in homogeneous form with clear physical characteristics. Mixed, chaotic old electronics will not pass verification. Sorting, categorisation, and standardised packaging must be completed before export.
VI. Conclusion
The effectiveness of Permendag 23/2026 marks the transition of Indonesia's used electronics imports from a "grey area" to "narrow-channel regularisation." For Chinese companies exporting used equipment and refurbished electronics, the compliance pathway is now clear, but the threshold has risen significantly.
Core assessment: If your product falls within the 136 HS codes and the end user is a processing enterprise within Batam KPBPB, this channel remains available; if the final destination is the Indonesian domestic market, feasibility needs to be reassessed.